Wolf Heat Pump FHS-180-S-230V-e2-M2 Storage capacity 180 L, R290

Environmentally friendly domestic hot water heat pump. Uses a cylinder with a combined direct-expansion air/water heat pump in monobloc design. Integrated electric heating element 2kW + heat pump 1.6 kW = 3.6 kW high efficiency: COP(A20/10-55) = 3.2 according to EN 16147/2011 with tapping profile L
Domestic hot water temperature via heat pump up to 65°C. Setpoint temperature override using SG-Ready to optimize self-consumption. Three operating modes possible with active photovoltaic contact: Heat pump only, heat pump and electric heating element, electric heating element only.
Can generate up to 420 liters of hot water per day.
Integrated control system. Easily adjustable with an intuitive rotary push-button. Extensive range of functions including hot water time program, holiday mode, boost function, adjustable anti-legionella function.
Heat pump with demand-based defrost function.
Heat source: Recirculating air or exhaust air operation via duct system possible.
Compact design in a rectangular housing. Perfect for corner and cabinet installation in tight spaces. Particularly low for low cellar ceilings or cabinet installation.
With two additional air duct connections for installation in low rooms.
Domestic hot water heat pump, plug-ready (SCHUKO, 230V)
Easy replacement for existing cylinders.
Safe separation of refrigerant and drinking water through external safety condenser (direct expansion).
Cellar or storage room can be cooled and dehumidified.

PU rigid foam insulation for low heat loss Air connection protection 160mm for air ducting with Wolf ISO pipe DN160
Energy efficiency class: Water heating A+
Technical data:
COP (L20/W10-55) - Indoor air 3.2
Tapping profile L
Energy efficiency / -class (medium climate zone): 129% / A+
Standby power 6 W
Hot water output at mixed water 40°C: 650 l / 24h
Sound power level (according to EN12102 and EN9614-2) Measurement: Height 1m; Distance 2m:
WP surface 48 dB(A)
Air inlet / outlet 59 / 61 dB(A)
Heating capacity compressor 1.009 kW
Max. heating capacity 3.009 kW
Air flow rate: minimum / stage 1 / stage 2 100 m³/h / 180 m³/h / 250 m³/h
Refrigerant R290 - 0.150 kg
GWP 3
CO2 equivalent 0.420 T/CO2 equivalent
Temperature adjustment range WP +5°C to +62°C
Maximum hot water temperature 65°C
Supply air temperature range +5°C to +35°C
Voltage / frequency: 230 V / 50 Hz
Fuse: 10 A
Protection class: IP 21
Power consumption compressor: 0.344 kW
Power auxiliary heater: 2.0 kW
Cylinder material: HD stainless steel tank
Cylinder volume: 166l
Test / nominal pressure: 13 bar / 10 bar
Cold water: R ¾