Facing Restoration Anchor VBS M8 x 265 Stainless Steel A4 FISCHER

The fischer VBS-M brick-tie repair anchor is a mechanical system for the subsequent, officially approved fastening of facing masonry with and without an air gap. The system consists of a plastic sleeve with a double expansion zone and a stainless steel screw. The VBS-M is installed in a time-saving push-through installation in the inner and outer leaf masonry. The two expansion zones of the anchor create a secure fastening in both the inner and outer leaves. This is because only once the anchor grips in the inner leaf is it fixed in the facing masonry. The fischer VBS-M brick-tie repair anchor is primarily suitable for the quick repair of cavity walls to which an external thermal insulation composite system (ETICS) is subsequently applied. Further technical properties: · Building material: Solid brick masonry, solid building material · Drill hole depth: 285mm · Drilling depth = embedment depth: 285mm · DIBT approval: Yes · Effective embedment depth: >50mm · Thread dimension (mm): 8mm · Air gap for 115mm facing masonry, 20mm countersunk: 100 - 120mm · Air gap for 115mm facing masonry, flush-mounted: 80 - 100mm · Air gap or insulation: 100mm · Material: Stainless steel · Installation type: Push-through installation · Nominal embedment depth: > 50mm · Professional / DIY: Professional · Test mark / approvals: DIBT approval · VDS approval: Yes · Embedment depth: > 50mm · Facing masonry + cavity: 215mm · Packaging variant: Folding box · Facing shell: 50mm · Max. cavity for 115mm facing masonry, 20mm countersunk: 120mm · Max. cavity for 115mm facing masonry, flush-mounted: 100mm High flexibility due to approved fastening in joints and facing bricks. No frost and corrosion damage due to water drip coil. Invisible installation due to subsequent grouting of the drill hole. Countersunk or flush-mounted installation possible thanks to small anchor rim and small screw head. Economical installation due to shallow embedment depth.