Brick Veneer Remedial Tie VBS M8 x 245 FISCHER

The fischer facade repair anchor VBS-M is a mechanical system for the subsequent, officially approved fastening of facade masonry with and without an air gap. The system consists of a plastic sleeve with a double expansion zone and a screw made of galvanized steel. The VBS-M is installed in a time-saving through-hole installation in the backing wall and in the facade masonry. The two expansion zones of the anchor create a secure fastening in the backing wall and in the front shell. Only when the anchor grips in the backing wall is it fixed in the facade masonry. The fischer facade repair anchor VBS-M is particularly suitable for the quick facade renovation of double-shell masonry, to which a thermal insulation composite system is subsequently attached. Further technical properties: · Building material: Solid brick masonry, solid building material · Drill hole depth: 265mm · Drilling depth = setting depth: 265mm · DIBT approval: Yes · Effective anchorage depth: >50mm · Thread size (mm): 8mm · Air gap with 115 mm facade masonry set 20 mm recessed: 80 - 100mm · Air gap with 115 mm facade masonry set flush: 60 - 80mm · Air gap or insulation: 80mm · Material: Galvanized steel · Installation type: Through-hole installation · Nominal anchorage depth: > 50mm · Professional / DIY: Professional · Test mark / approvals: DIBT approval · VDS approval: Yes · Anchorage depth: > 50mm · Facade masonry + cavity: 195mm · Packaging variant: Folding box · Facing shell: 50mm · Max. cavity with 115 mm facade masonry, set 20 mm recessed: 100mm · Max. cavity with 115 mm facade masonry, set flush: 80mm High flexibility due to approved fastening in the joints and in the facing brick. No frost and corrosion damage due to water drip coil. Invisible installation by subsequent grouting of the drill hole. Recessed or flush-to-surface installation possible due to small plug rim and small screw head. Economical installation due to shallow anchorage depth.