Fischer VBS M8 x 245 A4 Stainless Steel Veneer Tie

The fischer VBS-M brick-tie repair anchor is a mechanical system for the subsequent, officially approved attachment of brickwork with and without an air gap. The system consists of a plastic sleeve with a double expansion zone and a stainless steel screw. The VBS-M is installed using time-saving through-fixing in the inner and outer leaf masonry. The two expansion zones of the anchor create a secure fixing in both the inner and outer leaves. This is because the anchor is only fixed in the outer leaf once it has gripped in the inner leaf. The fischer VBS-M brick-tie repair anchor is primarily suitable for the quick repair of cavity walls to which an external thermal insulation composite system (ETICS) is subsequently applied. Further technical features: · Building material: solid building material, solid masonry · Drill hole depth: 265mm · Drilling depth = embedment depth: 265mm · DIBT approval: Yes · Effective embedment depth: >50mm · Thread size (mm): 8mm · Air gap with 115 mm outer leaf masonry, set 20 mm recessed: 80 - 100mm · Air gap with 115 mm outer leaf masonry, set flush: 60 - 80mm · Air gap or insulation: 80mm · Material: Stainless steel · Installation type: Through-fixing · Nominal embedment depth: > 50mm · Professional / DIY: Professional · Test marks / approvals: DIBT approval · VDS approval: Yes · Embedment depth: > 50mm · Outer leaf masonry + cavity width: 195mm · Packaging variant: folding carton · Outer leaf: 50mm · Max. cavity width with 115 mm outer leaf masonry, set 20 mm recessed: 100mm · Max. cavity width with 115 mm outer leaf masonry, set flush: 80mm High flexibility due to approved fixing in the joint and in the face brick. No frost or corrosion damage due to water drip helix. Invisible installation through subsequent grouting of the drill hole. Recessed or flush-to-surface installation possible due to small anchor rim and small screw head. Economical installation due to low embedment depth.