VBS M8 x 205 FISCHER brick-facing remedial anchor

The fischer façade renovation anchor VBS-M is a mechanical system for the subsequent, building authority-approved fastening of a facing masonry, with or without an air layer. The system consists of a plastic sleeve with a double expansion zone and a screw made of electrogalvanized steel. The VBS-M is installed in a time-saving through-fix installation in the inner leaf and in the facing masonry. The two expansion zones of the anchor create a secure fastening in the inner leaf and in the outer leaf. This is because the anchor is only fixed in the facing masonry once it grips the inner leaf. The fischer façade renovation anchor VBS-M is particularly suitable for the rapid renovation of double-leaf masonry, to which a thermal insulation composite system is subsequently applied. Further technical properties: · Building material: Solid masonry, solid building material · Drill hole depth: 225mm · Drilling depth = setting depth: 225mm · DIBT approval: Yes · Effective embedment depth: >50mm · Thread dimension (mm): 8mm · Air layer with 115 mm facing masonry, set 20 mm recessed: 40 - 60mm · Air layer with 115 mm facing masonry, set flush: 20 - 40mm · Air layer or insulation: 40mm · Material: Electrogalvanized steel · Installation type: Through-fix installation · Nominal embedment depth: > 50mm · Professional / DIY: Professional · Test mark / approvals: DIBT approval · VDS approval: Yes · Embedment depth: > 50mm · Facing masonry + cavity: 155mm · Packaging variant: Folding box · Facing shell: 50mm · Max. cavity with 115 mm facing masonry, set 20 mm recessed: 60mm · Max. cavity with 115 mm facing masonry, set flush: 40mm High flexibility due to approved fastening in the joints and in the facing brick. No frost and corrosion damage due to water drip coil. Invisible installation thanks to subsequent grouting of the drill hole. Recessed or flush installation possible thanks to small anchor rim and small screw head. Economical installation due to low embedment depth.