Facing renovation anchor VBS M8 x 1M85 Stainless steel A4 FISCHER

The fischer VBS-M remedial wall tie is a mechanical system for the subsequent, officially approved fastening of masonry veneers with or without an air gap. The system consists of a plastic sleeve with a dual expansion zone and a stainless steel screw. The VBS-M is installed in a time-saving through-fix installation in the backing wall and in the masonry veneer. The two expansion zones of the anchor create a secure fastening in the backing wall and in the outer leaf. This is because the anchor is only secured in the masonry veneer once it engages in the backing wall. The fischer VBS-M remedial wall tie is primarily suitable for the quick renovation of double-leaf masonry, where an external thermal insulation composite system is subsequently applied. Further technical features: · Building material: Solid building material, solid brick masonry · Drill hole depth: 205mm · Drilling depth = setting depth: 205mm · DIBT approval: Yes · Effective embedment depth: >50mm · Thread size (mm): 8mm · Air gap with 115 mm masonry veneer, set recessed by 20 mm: 0 - 40mm · Air gap with 115 mm masonry veneer, set flush: 0 - 20mm · Air gap or insulation: 20mm · Material: Stainless steel · Installation type: Through-fix installation · Nominal embedment depth: > 50mm · Professional / DIY: Professional · Test mark / approvals: DIBT approval · VDS approval: Yes · Embedment depth: > 50mm · Masonry veneer + cavity width: 135mm · Packaging variant: Folding box · Outer leaf: 50mm · Max. cavity width with 115 mm masonry veneer, set recessed by 20 mm: 40mm · Max. cavity width with 115 mm masonry veneer, set flush: 20mm High flexibility due to approved fastening in joints and in the facing brick. No frost and corrosion damage thanks to the water drip coil. Invisible installation due to subsequent grouting of the drill hole. Recessed or flush-to-surface installation possible due to small anchor rim and small screw head. Economical installation due to shallow embedment depth.