Fischer VBS 8 Facade Anchor, 318 mm Length, A4 Stainless Steel

The fischer façade repair anchor VBS 8 is a system with official building authority approval for the subsequent fastening of brick façades with and without an air gap. The system components include fischer high-performance mortar FIS V, a plastic anchor sleeve, and a profiled wire made of stainless steel. The VBS 8 is installed using push-through installation in the mortar joint of the outer leaf. The anchor sleeve is inserted into the drill hole. Then, the mortar is injected, which anchors the 4 mm wire anchor without expansion pressure in the load-bearing wall and the outer leaf. Marketing claim: Professional façade repair for cavity walls. Top features: Official building authority approval. High safety: Installation possible in the entire mortar joint. No spalling or cleavage cracks. Therefore, the VBS 8 can also be used in old masonry. Invisible fastening due to the gray color of the injection mortar. Economical fastening due to the small drill diameter of only 8 mm. Advantages: Due to the drill diameter of only 8 mm, the mortar requirement per fastening point is minimal. This makes the VBS 8 particularly economical. The gray color of the injection mortar is similar to the color of the mortar joint. This creates a nearly invisible fastening. The expansion-pressure-free fastening prevents spalling or cleavage cracks. This means the VBS 8 can also be used in old and sensitive masonry. The approved installation in the entire mortar joint ensures high installation safety. Further technical properties: · Material: Stainless steel A4 · Contents per box: 100 · Anchors per 360 ml cartridge: 24 · Building material: Solid building material, perforated brick masonry · Nominal drill diameter: 8mm · Drilling depth = embedment depth: 325mm · DIBT approval: Yes · Effective embedment depth: >60mm · Fill quantity FIS V in load-bearing wall: 6 Skt · Thread size (mm): 8mm · Air gap or insulation: 120 - 150mm · Installation type: Push-through installation · Pro / DIY: Pro · Test marks / Approvals: DIBT Approval · VDS approval: Yes · Embedment depth: > 60mm · Packaging variant: Folding box · Outer leaf: 90mm Official building authority approval. High safety: Installation possible in the entire mortar joint. No spalling or cleavage cracks. Therefore, the VBS 8 can also be used in old masonry. Invisible fastening due to the gray color of the injection mortar. Economical fastening due to the small drill diameter of only 8 mm.