Facing refurbishment anchor VBS 8 length 288 mm A4 stainless steel A4 FISCHER

The fischer brick tie VBS 8 is a building authority approved system for the subsequent fastening of facing masonry with and without a cavity. System components include fischer high-performance mortar FIS V, a plastic anchor sleeve, and a profiled stainless steel wire. The VBS 8 is installed using push-through installation in the mortar joint of the facing shell. The anchor sleeve is inserted into the drill hole. Then, mortar is injected, which anchors the 4 mm wire anchor without expansion pressure in the load-bearing shell and the facing shell. Marketing Claim: Professional refurbishment of double-leaf masonry. Top Features: Building authority approval. High safety: Installation possible in the entire mortar joint. No spalling or hairline cracks. Therefore, the VBS 8 can also be used in old masonry. Invisible fastening due to the gray color of the injection mortar. Economical fastening due to the small drill diameter of only 8 mm. Advantages: Due to the drill diameter of only 8 mm, the mortar consumption per fastening point is minimal. This makes the VBS 8 particularly economical. The gray color of the injection mortar is similar to the color of the mortar joint. This creates an almost invisible fastening. The expansion-pressure-free fastening prevents spalling or hairline cracks. This allows the VBS 8 to be used even in old and sensitive masonry. The approved installation in the entire mortar joint ensures high installation safety. Further technical properties: · Material: Stainless steel A4 · Contents per box: 100 · Anchors per 360 ml cartridge: 26 · Building material: Perforated brick masonry, solid building material · Nominal drill diameter: 8mm · Drill depth = setting depth: 295mm · DIBT approval: Yes · Effective embedment depth: >60mm · Fill quantity FIS V in load-bearing shell: 6 Skt · Thread size (mm): 8mm · Cavity or insulation: 80 - 120mm · Installation type: Push-through installation · Pro / DIY: Pro · Test marks / approvals: DIBT approval · VDS approval: Yes · Embedment depth: > 60mm · Packaging variant: Folding carton · Facing shell: 90mm Building authority approval. High safety: Installation possible in the entire mortar joint. No spalling or hairline cracks. Therefore, the VBS 8 can also be used in old masonry. Invisible fastening due to the gray color of the injection mortar. Economical fastening due to the small drill diameter of only 8 mm.