Fischer Facade Tie VBS 8 Length 188 mm A4 Stainless Steel

The fischer facade renovation anchor VBS 8 is a system with official building approval for the subsequent fastening of facade masonry with and without an air gap. The system components are fischer high-performance mortar FIS V, a plastic anchor sleeve, and a profiled stainless steel wire. The VBS 8 is installed using push-through installation in the bed joint of the outer leaf. The anchor sleeve is inserted into the drill hole. Then, the mortar is injected, which anchors the 4 mm wire anchor without expansion pressure in the inner and outer leaves. Marketing claim: Professional facade renovation for cavity walls. Top Features: Official building approval. High safety: Installation possible in the entire bed joint. No spalling or split cracks. Therefore, the VBS 8 can also be used in old masonry. Invisible fastening due to the gray color of the injection mortar. Economical fastening due to the small drill diameter of only 8 mm. Advantages: Due to the drill diameter of only 8 mm, the mortar requirement per fastening point is minimal. This makes the VBS 8 particularly economical. The gray color of the injection mortar is similar to the color of the bed joint. This results in an almost invisible fastening. The expansion-pressure-free fastening prevents spalling or split cracks. This allows the VBS 8 to be used even in old and sensitive masonry. The approved installation in the entire bed joint ensures high installation safety. Further technical properties: · Material: Stainless steel A4 · Content per carton: 100 · Anchors per 360 ml cartridge: 34 · Building material: Perforated brick masonry, solid building material · Nominal drill diameter: 8mm · Drilling depth = setting depth: 195mm · DIBT approval: Yes · Effective embedment depth: >60mm · Fill quantity FIS V in inner leaf: 4 scale divisions · Thread size (mm): 8mm · Air gap or insulation: 0 - 20mm · Installation type: Push-through installation · Pro / DIY: Pro · Test marks / approvals: DIBT approval · VDS approval: Yes · Embedment depth: > 60mm · Packaging variant: Folding box · Outer leaf: 90mm Official building approval. High safety: Installation possible in the entire bed joint. No spalling or split cracks. Therefore, the VBS 8 can also be used in old masonry. Invisible fastening due to the gray color of the injection mortar. Economical fastening due to the small drill diameter of only 8 mm.