Separating device 15 opening A 25-155mm for item no. 41 57 490 003 KUKKO

Application: for pulling ball bearings, roller bearings, inner rings and other flush-mounted parts · the sharp cutting edges enable flush-mounted parts to be pulled off where 2- and 3-jaw pullers are unusable (Fig. 1) · the separating jaws are clamped by evenly tightening the nuts on the side bolts. Method of operation: pulling is carried out by tightening the spindle against the shaft end (Figures 2 and 3); with the larger pulling devices, hydraulic operation is also possible. Hydraulic operation (Figure 4): (hydraulics not included in scope of delivery) use wrench (b) to screw the hydraulic spindle into the thread of the puller's traverse · until the pressure piece presses firmly against the shaft, then activate the hydraulics by turning the upper spindle (a) · Note: Figures 2 and 3 show the separating device in combination with the pulling device Art. No. 4157 490 000, 4157 490 001, 4157 490 002, 4157 490 003 (not included in scope of delivery). Figure 4 shows the separating device in combination with the pulling device Art. No. 4157 490 000, 4157 490 001, 4157 490 002, 4157 490 003 and a hydraulic spindle (pulling device and hydraulic spindle are not included in scope of delivery). Please inquire about the hydraulic spindle separately. Further technical features: · Weight: 5.3 kg