Separator 15 opening A 22-115mm for item no. 41 57 490 002 KUKKO

Application: For pulling ball bearings, roller bearings, inner rings, and other flush-fitting parts. The sharp cutting edges allow the removal of flush-fitting parts where 2-arm and 3-arm pullers cannot be used (Fig. 1). The separating jaws are clamped by evenly tightening the nuts on the side bolts. Operation: Pulling is performed by tightening the spindle against the shaft end (Figures 2 and 3). For larger pulling devices, hydraulic operation is also possible. Hydraulic Operation (Figure 4): (Hydraulics not included in the scope of delivery) Screw the spindle of the hydraulic unit into the thread of the puller's traverse with wrench (b). Continue until the pressure piece is firmly pressed against the shaft, then activate the hydraulics by turning the upper spindle (a). Please note: Figures 2 and 3 show the separating device in combination with pulling devices part no. 4157 490 000, 4157 490 001, 4157 490 002, 4157 490 003 (not included in the scope of delivery). Figure 4 shows the separating device in combination with pulling devices part no. 4157 490 000, 4157 490 001, 4157 490 002, 4157 490 003 and a hydraulic spindle (pulling device and hydraulic spindle are not included in the scope of delivery). Please inquire about hydraulic spindles separately. Further technical characteristics: · Weight: 2.9 kg