Separator 15 Opening A 12-75mm for Item No. 41 57 490 001 KUKKO

Application: For removing ball bearings, roller bearings, inner rings and other flush-fitting parts · the sharp cutting edges enable the removal of flush-fitting parts where 2- and 3-arm pullers are unsuitable (Fig. 1) · the separating jaws are clamped by evenly tightening the nuts on the side bolts. Operation: Removal is performed by tightening the spindle against the shaft end (Figures 2 and 3); for larger pullers, hydraulic operation is also possible. Hydraulic operation (Figure 4): (Hydraulic unit not included) Use the wrench (b) to screw the hydraulic spindle into the thread of the puller's crossbeam · until the pressure piece presses firmly against the shaft, then activate the hydraulic unit by turning the upper spindle (a) · Please note: Figures 2 and 3 show the separating device in combination with puller Art. No. 4157 490 000, 4157 490 001, 4157 490 002, 4157 490 003 (not included). Figure 4 shows the separating device in combination with puller Art. No. 4157 490 000, 4157 490 001, 4157 490 002, 4157 490 003 and a hydraulic spindle (puller and hydraulic spindle not included). Please inquire separately for the hydraulic spindle. Further technical characteristics: · Weight: 1.11 kg