TA control and balancing valve TA-Modulator pressure independent, DN25, G 1 1/4, PN 16

TA-Modulator pressure-independent control and regulating valve with integrated differential pressure controller. For use with continuous M 30 x 1.5 actuators with automatic stroke recognition. Suitable as a flow limiter without an actuator. Flow setting and regulation on the thermostatic top part without tools. Stepless flow setting from 100% to 0%. Set value, valve type and valve size visible from above. 6.5 mm stroke, limited by flow limitation. With 2 measuring nipples for measuring: flow, temperature, pressure loss and available differential pressure from the pump. To measure the pump head, the built-in Dp controller can be bypassed via a measuring nipple. Shut-off function with handwheel for flow setting. Access to measuring nipples and flow setting on the actuator side. Can be installed in all mounting positions. Even with the actuator facing downwards. Leakage rate <= 0.01% of the maximum flow at the highest setting (Class IV according to EN 60534-4). Housing made of dezincification-resistant Ametal. External thread G 1 1/4 according to ISO 228., Max. flow: 1750 l/h., Max. differential pressure 400 kPa., Min. differential pressure 23 kPa., Operating temperature from -10 deg. C. to +90 deg. C., Nominal pressure PN 16., Make: IMI TA, Version: DN 25, Article no. 52164325