Nail anchor FNA II 6x30/30 A4 stainless steel FISCHER

The fischer Nail Anchor FNA II RB is a stainless steel fastening element for attaching fire protection panels and for multiple fastenings of other non-load-bearing systems. The nail anchor is installed using time-saving push-through installation. After drilling the hole, the nail anchor is driven in with a few hammer blows or set with a pneumatic setting tool. The pre-assembled large washer significantly increases pull-out forces and prevents damage to the panel during dismantling. For dismantling, the nail head is removed with special pliers. Further technical properties: · Approval: Yes · Fire protection relevant: Yes · Push-through installation: Yes · Suitable for concrete: Yes · Suitable for natural stone: Yes · Min. drill hole depth: 70mm · Min. drill hole depth for push-through installation: 66mm · Min. drill hole depth for pre-installation: 36mm · Min. embedment depth: 30mm · Professional / DIY: Professional · Test marks / approvals: ETA - European Technical Assessment, Fire protection classification · VDS approval: Yes · Packaging variant: Folding carton · Max. thickness of attachment part: 30mm · Max. usable length: 30mm Easy dismantling of the fire protection panel without damage. This can be reused. Easy installation with hammer or pneumatic setting tool. Low embedment depth saves time and costs. Test certificates from RTW and ZWS. Secure fastening even with vibrations, suction and pressure effects.