Ventilation clamp LGS 800 W861xH835.0mm galvanized steel FISCHER

The fischer pipe clamp LGS 800 for nominal size 800 mm · two-piece design with bonded sound insulation insert for fastening spiral-seam or plastic pipes. The large opening angle of the LGS allows for quick and easy installation. The two-screw design enables optimized adaptation to the pipe's outer diameter. Connection nut with combination thread M8 / M10 for receiving threaded rods or hanger bolts. Both clamp halves are perforated for connection with two screws or threaded rods with nuts. This doubles the recommended load. Marketing claim: Pipe clamp - ventilation pipe clamp LGS Advantages: From size 450mm: pipe clamps can be attached with two threaded rods to the clamp band, doubling the specified loads. The sound insulation insert provides noise reduction and prevents contact corrosion. Two-screw pipe clamp for optimized adaptation to the pipe's outer diameter. Captive locking screws. Two-screw design for optimized adaptation to the pipe's outer diameter. Large opening angle for quick installation. Connection nut with combination thread M8 / M10. Connection nut with combination thread M8/M10. Captive screw. Sound insulation insert. Further technical characteristics: · Connection thread: M8 / M10 · Connection nut: resistance welded, cap nut M8 / M10, SW 13 · Fire behavior: DIN 4102: Class B2 · Clamp band width: 25mm · Clamp band width x thickness: 25 x 3.0mm · Connection nut height: 17mm · Height Z1: 408mm · Height Z2: 418mm · Installation torque: 5Nm · Nominal size: 800 · Pro / DIY: Pro · Sound insulation insert: Material: SBR/EPDM, chlorine-free, silicone-free · Wrench size: 13mm · Clamping range: 800mm · Clamping range from - to: 800mm · Clamp band thickness: 3mm · VDS approval: Yes · Max. recommended load (centr. tension): 0.8kN · Max. recommended static load (centr. tension): 0.8kN Connection nut with combination thread M8 / M10. Sound insulation insert. Captive screw. Two-screw design for optimized adaptation to the pipe's outer diameter.