Fischer SXRL D14xL120mm long-shaft plug, hex head with washer, galvanized

The fischer long shaft plug SXRL-FUS, with the fischer hex head screw with integrated washer and integrated bit holder, is approved for multiple fixings of non-load-bearing systems in masonry, concrete, and aerated concrete. In perforated brick masonry, the two expansion zones of the plug uniformly introduce force; in aerated concrete and solid building materials, these combine to form a long expansion element. With the safety screw made of electro-galvanized steel, the long shaft plug is suitable for fixing metal constructions. Marketing Claim: The versatile anchor with multiple embedment depths. Advantages: The long expansion element with multiple embedment depths of 50, 70, and 90 mm for SXRL 8 and SXRL 10, and 70 and 90 mm for SXRL 14, makes the SXRL a versatile product. Due to the special geometry of the plug, the holding forces are distributed evenly in the drill hole. The approval for single point fixing in cracked concrete makes the SXRL 10 a specialist in concrete for applications such as fixing canopies and outdoor railings, and an economical alternative to steel anchors. When set deeper, the longer ribs prevent the plug from spinning during installation. SXRL 10 and 14 are additionally approved for applications subjected to compression and may be used for facade constructions that are installed with a standoff without wall brackets. The SXRL with usable lengths up to 240 mm offers the right plug for every application. Top Features: ETA assessment with excellent load values: secure multiple fixings of non-load-bearing systems in concrete and masonry. The long expansion element makes the SXRL versatile in application. Loads are uniformly introduced into the building material by the plug geometry. This prevents damage to webs in thin-walled building materials. Easy installation: ribs prevent the plug from spinning when set deeper. Further technical properties: · DIBT approval: Yes · Push-through installation: Yes · ETA approval: Yes · Color: grey · Usable length at embedment depth 70 mm: 50mm · Usable length at embedment depth 90 mm: 30mm · Surface (screw): Electro-galvanized steel · Professional / DIY: Professional · VDS approval: Yes · Packaging variant: Folding box ETA approval: secure multiple fixings of non-load-bearing systems in concrete and masonry. Holding forces are uniformly introduced into the building material by the plug geometry. This prevents damage to webs in thin-walled building materials. Highest holding forces in aerated concrete and solid building materials: The two expansion zones combine to form a long expansion element. Easy installation: ribs prevent the plug from spinning when set deeper.