KM Powerkon LT w. pre-set valve, display, left, 1030x143x618 mm

Kampmann PowerKon LT heat pump convector for powerful and efficient heating and cooling. Wall-mounted fan coil unit consisting of a functional unit and a casing hood for new buildings and existing properties. Functional unit made of EPP (expanded polypropylene) with sound-reducing, heat-insulating and flow-optimized properties encompasses all functional components. Easy to install due to low weight. Hygienic according to VDI 6022. Life cycle assessment data in the form of an EPD published according to EN 15804 and available for download from The International EPD System. Registered in the DGNB Navigator building product platform. GWP (Phase A1-A3), kg CO2 Eq. 9.28E+01 Further calculations possible online. Unobtrusive aesthetic casing in flat panel radiator design without visible air intake grilles on the front. Front in RAL 9016, side panels in RAL 9006. Air outlet grille in RAL 9016 on the top with droplet profile for directed air flow. ISO Coarse filter on the underside of the basic unit as protection against interference and contamination in the unit. Easy vacuuming possible when installed. The casing can be removed without tools for filter removal and complete cleaning of the unit. 2-pipe High-performance heat exchanger with copper pipes and aluminum fins for optimal heat transfer at low temperatures. Max. operating pressure bar 10 Max. water inlet temp. degrees C 95 Min. water inlet temp. degrees C 6 Max. air inlet temp. degrees C 30 Max. glycol content % 50 Flow-optimized and balanced cross-flow fan for high air volume flows with low sound emissions. Energy-saving EC fan with 0-10 V input for stepless speed control. All rotating parts are quietly and maintenance-free mounted. Factory wired. Integrated condensate pan with free drain for heat exchangers and valves. Made of EPP with a specially treated surface for safe drainage. A condensate pump (optional accessory) concealed under the casing conveys accumulated condensate to appropriate disposal lines. Condensate pan designed as an independent component that is easy to remove for cleaning and maintenance in accordance with VDI 6022. For mounting, the mounting rail is attached to the wall. The enclosed drilling template simplifies the positioning of the PowerKon LT. The basic unit is hung on the mounting rail and secured to the wall against unintentional lifting. The casing is also hung on the mounting rail and then secured to the basic unit via two latches. The mounting rail corresponds to requirement class 3 of VDI 6036. Includes pre-adjustable thermostatic valve, thermoelectric actuator and lockable return connection for regulated operation. Equipped with corrugated pipes for connection to supply lines. Mounted and wired inside the unit. Display factory-mounted on the unit and wired ready for connection, including internally mounted connection box, consisting of: Control board: - Connection terminals power supply 230 V AC - Connection terminals for stepless EC fan, two valve actuators 230 V AC On/Off and opt. condensate pump - Power supply 24 V DC - Temperature sensor NTC10K Functions: - Motor and condensate monitoring - Room frost protection function; - Demand-dependent fan control in automatic mode and optionally step selection 1-2-3 Touch display integrated into casing, consisting of 7-segment display and touch operation for adjusting the set temperature, fan speeds and ON/OFF. Size 2 Dimensions (WxHxD) mm 141 x 618 x 1030 Weight kg 20 Water content l 1.2 Connection