Kermi x-change dynamic pro M Air/Water Outdoor, without controller, R290 2.5kg

Kermi x-change dynamic pro M
Air/Water Outdoor, without controller, R290
2.5kg
The output-controlled air/water
heat pump (monobloc version) for
outdoor installation convinces with
very efficient and
whisper-quiet operation with the
natural refrigerant R290. It serves
for heating and domestic hot water heating
as well as for active cooling operation
through circuit reversal. This is made possible
by the latest
axial fan technology incl.
whisper mode and a large
modulation range. The optimized
evaporator in conjunction with the
multi-insulated and 3-fold
sound-decoupled refrigeration circuit ensures
lowest sound and
noise emissions. Due to the
integrated vibration decoupling, the
heat pump can be connected directly to the heating system
and the microbubble separator and safety valve (2.5 bar)
already installed in the heat pump
reduce the installation effort. Also the
electrically heated
condensate drain pan is already installed ex works
and additionally the
pressure in the charging circuit can be read out in the control
and via remote maintenance. The
high-quality and very attractive
housing in robust and
weather-resistant metal design
with the color dark grey DB703
ensures a very discreet and modern
appearance.
The heat pump control must be ordered
separately and can be designed
as a wall controller or already integrated
into the storage system, depending on the local conditions, to save space.
If strong wind influences are to be expected at the installation site
of the heat pump, the
evaporator protection grille must be installed for trouble-free operation.
To ensure safe operation of the
heat pump system,
an additional heater must be installed in the buffer tank.
ErP product label efficiency class
heating 35°C (LT)/55°C (MT):
A+++/A+++
P Design: 10 kW
Heating output A-7/W35: 4-13 kW
Mains connection compressor: ^3, 400 V, 50Hz
Mains connection control: ^1, 230 V, 50Hz
Max. flow temperature: 70 °C up to
A-10°C
Operating limit heat source heating: -20
°C to 40 °C
COP A2/W35 (EN 14511): 4.95
Rated heating output A2/W35 (EN 14511):
4.97 kW
COP A7W35 (EN14511): 5.90
Rated heating output A7/W35 (EN14511):
3.90 kW
COP A-7/W35 (EN 14511): 3.37
Rated heating output A-7/W35 (EN 14511):
8.91 kW
Sound power level according to ErP (EN 12102
A7/W55 part load): 47.2 dB(A)
Refrigerant / charge: R290 / 2.5 kg
GWP3
Refrigerant safety group: A3
(Observe installation conditions!!)
Smart Grid Ready: Yes
Dimensions WxDxH (mm): 1,450x710x1,110
Weight (kg): 229
Eta(S) average: NT: 225% MT: 170%
SCOP NT: 5.70 MT: 4.32
Connection heating flow/return: 1
1/4' male thread
Consisting of:
- Heat pump for outdoor installation for
heating and cooling, domestic hot water heating
- Heated condensate drain pan
- Microbubble separator and
safety valve (2.5 bar)
- Decoupling hoses and
dirt filter
-> Functionally necessary accessories:
Wall controller (x-center pro / Hydrobox
pro) or storage system incl. controller
-> To use the cooling function of the heat pump,
the storage system /