Kermi x-change dynamic pro L Air/Water Outdoor, without controller, R290 3kg

Kermi x-change dynamic pro L
Air/Water Outdoor, without controller, R290 3kg
The power-controlled air/water
heat pump (monobloc version) for
outdoor installation impresses with
very efficient and
whisper-quiet operation using the
natural refrigerant R290. It serves
for heating and domestic hot water heating
as well as for active cooling operation
by circuit reversal. This is made possible
by the latest
axial fan technology incl.
whisper mode and a large
modulation range. The optimized
evaporator, in conjunction with the
multiply insulated and triple
sound-decoupled refrigeration circuit, ensures
minimal sound and
noise emissions. Due to the
integrated vibration decoupling, the
heat pump can be connected directly to the heating system
and the microbubble separator already
installed in the heat pump and the
safety valve (2.5 bar) reduce
the installation effort. The
electrically heated
condensate tray is also factory-installed
and the
pressure in the charging circuit can additionally be read out in the control system and
via remote maintenance. The
high-quality and very attractive
housing in a robust and
weather-resistant metal design
with the color dark gray DB703
provides a very discreet and modern
appearance.
The heat pump control must be ordered separately
and can be implemented as a
wall controller or already integrated in the
storage system to save space, depending on
the local conditions. If strong
wind influences are to be expected at the heat pump's
installation site, the
evaporator protection grille must be installed for
trouble-free operation.
To ensure safe operation of the
heat pump system, a
supplementary heater must be installed in the buffer tank.
ErP product label efficiency class
Heating 35°C (LT)/55°C (MT):
A+++/A+++
P Design: 16 kW
Heating capacity A-7/W35: 6-20 kW
Mains connection compressor: ^3, 400 V, 50Hz
Mains connection control: ^1, 230 V, 50Hz
Max. flow temperature: 70°C up to
A-10°C
Operating limit heat source heating: -20
°C to 40°C
COP A2/W35 (EN 14511): 4.80
Rated heating capacity A2/W35 (EN 14511):
7.20 kW
COP A7W35 (EN14511): 5.70
Rated heating capacity A7/W35 (EN14511):
6.22 kW
COP A7/W55 (EN14511): 3.29
Rated heating capacity A7/W55 (EN14511):
5.58 kW
COP A-7/W35 (EN 14511): 3.23
Rated heating capacity A-7/W35 (EN 14511):
13.79 kW
Sound power level according to ErP (EN 12102
A7/W55 part load): 52 dB(A)
Refrigerant / charge quantity: R290 / 3.0 kg
GWP3
Refrigerant safety group: A3
(Observe installation conditions !!)
Smart Grid Ready: Yes
Dimensions WxDxH (mm): 1,450x710x1,310
Weight (kg): 280
Eta(S) average: NT: 217% MT: 162%
SCOP NT: 5.49 MT: 4.13
Connection heating flow/return: 1
1/4' male thread
Consisting of:
- Heat pump for outdoor installation for
heating and cooling, domestic hot water heating
- Heated condensate tray
- Microbubble separator and
safety valve (2.5 bar)
- Decoupling hoses and
dirt filter
-> Functionally necessary accessories:
Wall controller (x-center pro / Hydrobox
pro) or storage system incl. controller