Kermi Basic-D BH1172x35x599mm QN662, white, connection right, NAB900

Kermi Basic-D
Bathroom and living area radiators
with side connections on the left or right for the
replacement of DIN radiators and Kermi
flat radiators.
With horizontal round tubes, 24 mm diameter,
and vertical manifold tubes, 50 x
35 mm, D-profile. Without visible
welds. Gaps between the tube blocks
for towel hanging.
Mounting is on the
back of the D-profiles. The
included mounting set complies with
VDI 6036, Requirement Class 2.
Requirement Class 3 available on request.
The wall material on site must be
checked for sufficient load-bearing capacity.
Horizontal, vertical, and wall-distance
alignment possible. Visible parts of the
accessories in radiator color.
Ready for installation, packed in a carton and
shrink-wrapped in film.
Tested according to DIN EN 442. The
design complies with the former
BAGUV guidelines. Awarded the
RAL quality mark.
Standard color white (RAL 9016), radiator
color concept available at extra cost.
Chrome-plated versions are not suitable for rooms
with aggressive/humid atmospheres.
Bathrooms, kitchens, etc.,
as well as areas outside the
spray zone of showers, toilets,
... are not to be understood as rooms with
aggressive/humid atmospheres.
Connections:
2 x G 1/2' internal thread on the side of the
left or right manifold tube,
2 x G 1/2' internal thread downwards
Ventilation: G 1/4' internal thread to the
rear
Coating: Two-layer coating according to
DIN 55900,
Primer (ETL), powder coating
(EPS), emission-free even during
heating operation.
Operating pressure: max. 10 bar
Medium: Hot water up to 110 degrees C
Scope of delivery: Mounting set