Kermi Basic-D BH1172x35x450mm QN511, white, conn. right, NAB500

Kermi Basic-D
Bathroom and living area radiators
with side
connections on the left or right for
replacing DIN radiators and Kermi
flat panel radiators.
With horizontal round tubes with a diameter of
24 mm and vertical manifold tubes 50 x
35 mm as D-profile. Without visible
welds. Gaps between the tube blocks
for hanging towels.
Mounting is done on the
back of the D-profiles. The
supplied mounting set complies with
VDI 6036, requirement class 2.
Requirement class 3 available upon request.
The wall material on site must
be checked for sufficient load-bearing capacity.
Horizontal, vertical, and wall-distance alignment possible.
Visible parts of the
accessories in radiator color.
Ready for installation, packed in cardboard and
shrink-wrapped in foil.
Tested according to DIN EN 442. The
design complies with the former
BAGUV guidelines. Awarded with
the RAL quality mark.
Standard color white (RAL 9016), radiator
color concept available at an extra charge.
Chrome-plated finish not suitable for rooms
with aggressive/humid atmospheres.
Bathrooms, kitchens, etc.,
as well as places outside the
spray range of showers, toilets,
... are not to be understood as rooms with
aggressive/humid atmospheres.
Connections:
2 x G 1/2' internal thread on the side of the
left or right manifold,
2 x G 1/2' internal thread downwards
Ventilation: G 1/4' internal thread to the
rear
Painting: Two-layer paint according to
DIN 55900,
Primer (ETL), powder coating
(EPS), emission-free even in
heating operation.
Operating pressure: max. 10 bar
Medium: Hot water up to 110 degrees C
Scope of delivery: Mounting set