TermoFix B 130 FISCHER Insulation Fixing

The fischer Termofix B is a corrosion-protected screw anchor for fastening pressure-resistant insulation boards to sheet metal up to 1.5 mm thick. The insulation anchor consists of a polypropylene retaining plate and a pre-assembled self-drilling screw. The screw is protected against corrosion with a Delta-Seal coating and offers long-lasting safety. The Termofix B is installed with a cordless drill driver using through-hole installation without pre-drilling. The pre-assembled screw saves time. The screw head is sealed with the cap to prevent heat loss. The flexible head compensates for thermally induced stresses and prevents damage. Marketing Claim: The constructive ETICS screw anchor with Delta-Seal coated self-drilling screw for sheet metal substrates. Advantages: The pre-assembled screw shortens processing time. High corrosion protection of the screw due to the Delta-Seal coating. This means safety for years to come. The cap creates an air column above the screw head. This reduces heat transmission losses. The flexible head compensates for thermally induced stresses and prevents damage. For very soft insulation materials, it can be combined with the insulation plates DT 90 · DT 110 · DT 140. Top Features: Direct installation without pre-drilling in thin sheet metal up to 1.5 mm. Time-saving due to pre-assembled screw. Corrosion-resistant screw with Delta-Seal coating. Sealing cap integrated directly into the plate element. Further technical properties: · Building material: Sheet metal and panel building materials · Nominal drill diameter: 8mm · Min. embedment depth: 20mm · Professional / DIY: Professional · Embedment depth: 20mm · Packaging variant: Folding box · Max. usable length: 110mm