Timber Construction Screw PowerFull II Diameter 10mm L.600mm TX Countersunk Head Partial Thread Galvanized Blue Passivated 25 FISCHER

The fischer Premium full-thread PowerFull II screw is a timber construction screw approved for use not only in common softwoods but also in hardwoods. The 10 mm diameter PowerFull II differs in geometry from the 6 and 8 mm diameters. The 10 mm screw has a drill tip, which creates a pre-drilling effect and prevents long screws from veering off course. The risk of splitting is reduced, and the driving torque is lowered. In addition, small edge and axial distances are achieved. The version with a cylinder head allows for clean countersinking into the substrate. The European Technical Assessment guarantees an additional plus in safety. Marketing Claim: For economical connections in load-bearing timber constructions Advantages: The tip geometry ensures fast driving and reduces splitting behavior in the substrate. The 10 mm diameter PowerFull II differs in geometry from the 6 and 8 mm diameters. The 10 mm screw has a drill tip, which creates a pre-drilling effect and prevents long screws from veering off course. The risk of splitting is reduced, and the driving torque is lowered. The cylinder head ensures clean countersinking of the head. This can be deeply countersunk into the wood with a long bit. The screw geometry significantly improves the pull-out capacity and optimizes the driving torque. Top Features: Fast driving and low splitting behavior are due to the tip geometry. The cylinder head can be deeply countersunk into the wood with a long bit. Due to the screw geometry, very good technical values such as pull-out capacity and driving torque. The 10 mm screw has a drill tip, which creates a pre-drilling effect and prevents long screws from veering off course. Further technical properties: · Material: Steel · ETA approval: Yes · Professional / DIY: Professional