Timber Construction Screw PowerFull II Diameter 10mm L.500mm TX Countersunk Head Partial Thread blvz 25 FISCHER

The fischer Premium full-threaded screw PowerFull II is a timber construction screw that is approved for use in hardwoods in addition to the usual softwoods. The PowerFull II in 10 mm diameter differs in geometry from the 6 and 8 mm diameters. The 10 mm screw has a drill tip, which creates a pre-drilling effect and prevents long screws from running off course. The risk of splitting is reduced and the insertion torque is lowered. In addition, small edge and axial distances are achieved. The version with a cylinder head allows for clean countersinking into the substrate. The European Technical Assessment guarantees an additional plus in safety. Marketing Claim: For economical connections of load-bearing timber constructions Advantages: The tip geometry ensures quick insertion and reduces splitting in the substrate. The PowerFull II in 10 mm diameter differs in geometry from the 6 and 8 mm diameters. The 10 mm screw has a drill tip, which creates a pre-drilling effect and prevents long screws from running off course. The risk of splitting is reduced and the insertion torque is lowered. The cylinder head ensures clean countersinking of the head. This can be deeply countersunk into the wood with a long bit. The screw geometry significantly improves the pull-out capacity and optimizes the insertion torque. Top Features: Quick insertion and low splitting behavior are due to the tip geometry. The cylinder head can be deeply countersunk into the wood with a long bit. Due to the screw geometry, very good technical values such as pull-out capacity and insertion torque. The 10 mm screw has a drill tip, which creates a pre-drilling effect and prevents long screws from running off course. Further technical characteristics: · Material: Steel · ETA approval: Yes · Professional / DIY: Professional