High-performance anchor FH II M8 12/25 H FISCHER

The fischer high-performance anchor FH II H with cap nut is a sleeve anchor made of electro-galvanized steel. The anchor is installed using time-saving push-through installation. When the anchor is tightened, the cone is pulled into the expansion sleeve, bracing it against the drill hole wall. The black plastic ring prevents the anchor from spinning and absorbs any tightening slip. This pulls the fixture to the anchoring base. The fischer high-performance anchor FH II H with cap nut is ideally suited for fastening steel structures, machinery, and gates in cracked and non-cracked concrete. Further technical properties: · Anchor length: 115mm · Push-through installation: Yes · Thread size (mm): 8mm · Material: Electro-galvanized steel · Min. drill hole depth for push-through installation: 105mm · Min. embedment depth: 60mm · Usable length: 25mm · Professional / DIY: Professional · Test marks / approvals: Fire protection classification, ETA - European Technical Assessment, VdS approval, seismic · Seismic approval: C1 / C2 · Washer (outer diameter x thickness): 22 x 2.5mm · VDS approval: Yes · Packaging variant: Folding box · Max. thickness of the attachment: 25mm ETA approval for cracked concrete and seismic loads. Effort-saving installation due to optimized anchor geometry. With cap nut. Fewer fastening points due to high shear capacity. Time-saving push-through installation.