High-performance anchor FH II M6 10/50 H FISCHER

The fischer high-performance anchor FH II H with cap nut is a sleeve anchor made of electro-galvanized steel. The anchor is installed using time-saving push-through installation. When the anchor is tightened, the cone is pulled into the expansion sleeve, bracing it against the drill hole wall. The black plastic ring prevents the anchor from spinning and absorbs the tightening slip. This pulls the fixture to the anchoring base. The fischer high-performance anchor FH II H with cap nut is ideally suited for fastening steel structures, machines, and gates in cracked and non-cracked concrete. Further technical specifications: · Anchor length: 115mm · Push-through installation: Yes · Thread size (mm): 6mm · Material: Electro-galvanized steel · Min. drill hole depth for push-through installation: 105mm · Min. drill hole depth for pre-positioned installation: 55mm · Min. embedment depth: 40mm · Usable length: 50mm · Professional / DIY: Professional · Test marks / Approvals: ETA - European Technical Assessment, Fire protection classification · Washer (outer diameter x thickness): 24 x 2.5mm · VDS approval: Yes · Packaging variant: Folding carton · Max. thickness of fixture: 50mm ETA approval for cracked concrete. Effort-saving installation due to optimized anchor geometry. With cap nut. Fewer fastening points due to high shear load capacity. Time-saving push-through installation.