High-Performance Anchor FH II M6 10/50 B FISCHER

The fischer high-performance anchor FH II B with threaded bolt is a sleeve anchor made of electro-galvanized steel. The anchor is installed using time-saving push-through installation. When the anchor is tightened, the cone is pulled into the expansion sleeve, bracing it against the drill hole wall. The black plastic ring prevents the anchor from spinning and absorbs the tightening slip. This pulls the fixture to the anchoring base. The fischer high-performance anchor FH II B with threaded bolt is ideally suited for fastening grates, steel structures, and cable trays in cracked and non-cracked concrete. Marketing Claim: The push-through anchor with threaded bolt for fastenings with demanding design in cracked concrete. Advantages: The international approvals guarantee maximum safety and highest performance. Applications in earthquake zones (Seismic C1 and C2) are also covered by these approvals. The practical fastening via threaded bolt and nut allows for the dismantling of the attachment. The ideal interaction of the screw shaft and sleeve enables high shear load capacity. This means fewer fastening points are required. The optimized geometry intelligently reduces installation energy, thus ensuring force-saving installation. The use of hollow drills is regulated in the approval. Top Features: The international approvals guarantee maximum safety and highest performance. Also for applications in earthquake zones (Seismic C1 and C2). The ideal interaction of the screw shaft and sleeve enables high shear load capacity and fewer fastening points. The optimized geometry intelligently reduces installation energy, thus ensuring force-saving installation. Further technical characteristics: Anchor length: 110mm · Push-through installation: Yes · Thread size (mm): 6mm · Material: Electro-galvanized steel · Min. drill hole depth for push-through installation: 105mm · Min. embedment depth: 40mm · Usable length: 50mm · Professional / DIY: Professional · Test marks / approvals: Fire protection classification, ETA - European Technical Assessment · Washer (outer diameter x thickness): 24 x 2.5mm · VDS approval: Yes · Packaging variant: Polybag · Max. thickness of the attachment: 50mm ETA approval for cracked concrete. Force-saving installation thanks to optimized anchor geometry. With threaded bolt. Fewer fastening points due to high shear load capacity. Time-saving push-through installation.