High-Performance Anchor FH II M6 10/25 B FISCHER

The fischer high-performance anchor FH II B with threaded bolt is a sleeve anchor made of electro-galvanized steel. The anchor is installed in time-saving push-through installation. When the anchor is tightened, the cone is pulled into the expansion sleeve and tensions it against the borehole wall. The black plastic ring prevents the anchor from spinning and absorbs the tightening slip. This pulls the attachment part to the anchoring base. The fischer high-performance anchor FH II B with threaded bolt is ideally suited for fastening grids, steel structures, and cable trays in cracked and non-cracked concrete. Marketing Claim: The push-through anchor with threaded bolt for fastenings with demanding design in cracked concrete. Advantages: The international approvals guarantee maximum safety and highest performance. Applications in earthquake zones (Seismic C1 and C2) are also covered by these approvals. The practical fastening by means of threaded bolt and nut allows the dismantling of the attachment part. The ideal interaction of screw shaft and sleeve enables a high shear load capacity. This reduces the number of fastening points required. The optimized geometry intelligently reduces the setting energy and thus ensures an effort-saving installation. The use of hollow drills is regulated in the approval. Top Features: The international approvals guarantee maximum safety and highest performance. Also for applications in earthquake zones (Seismic C1 and C2). The ideal interaction of screw shaft and sleeve enables a high shear load capacity and fewer fastening points. The optimized geometry intelligently reduces the setting energy and thus ensures an effort-saving installation. Further technical characteristics: · Anchor length: 75mm · Push-through installation: Yes · Thread size (mm): 6mm · Material: Electro-galvanized steel · Min. drill hole depth for push-through installation: 80mm · Min. anchoring depth: 40mm · Usable length: 25mm · Professional / DIY: Professional · Test mark / approvals: ETA - European Technical Assessment, Fire protection classification · Washer (outer diameter x thickness): 24 x 2.5mm · VDS approval: Yes · Packaging variant: Polybag · Max. thickness of attachment part: 25mm ETA approval for cracked concrete. Effort-saving installation due to optimized anchor geometry. With threaded bolt. Fewer fastening points due to high shear load capacity. Time-saving push-through installation.