High-performance anchor FH II M12 18/25 H FISCHER

The fischer FH II H high-performance anchor with cap nut is a sleeve anchor made of electro-galvanized steel. The anchor is installed using time-saving push-through installation. When tightening the anchor, the cone is pulled into the expansion sleeve, bracing it against the drill hole wall. The black plastic ring prevents the anchor from spinning and absorbs any tightening slip, thereby pulling the attachment part against the anchoring base. The fischer FH II H high-performance anchor with cap nut is ideally suited for fastening steel structures, machinery, and gates in cracked and uncracked concrete. Further technical properties: Anchor length: 145mm · Push-through installation: Yes · Thread size (mm): 12mm · ICC approval: Yes · Material: Electro-galvanized steel · Min. drill hole depth for push-through installation: 130mm · Min. embedment depth: 80mm · Usable length: 25mm · Professional / DIY: Professional · Test marks / approvals: VdS approval, fire protection classification, FM (Factory Mutual), ICC - ES approval, seismic, ETA - European Technical Assessment · Seismic approval: C1 / C2 · Washer (outer diameter x thickness): 30 x 3mm · VDS approval: Yes · Packaging variant: Folding box · Max. thickness of the attachment part: 25mm ETA approval for cracked concrete and seismic loads. Effort-saving installation due to optimized anchor geometry. With cap nut. Fewer fastening points due to high shear load capacity. Time-saving push-through installation.