High-performance anchor FH II M10 15/50 H FISCHER

The fischer high-performance anchor FH II H with cap nut is a sleeve anchor made of electrogalvanized steel. The anchor is installed using time-saving push-through installation. When the anchor is tightened, the cone is pulled into the expansion sleeve, bracing it against the drill hole wall. The black plastic ring prevents the anchor from spinning and absorbs any slip during tightening. This pulls the fixture to the substrate. The fischer high-performance anchor FH II H with cap nut is ideal for fastening steel structures, machinery, and gates in cracked and uncracked concrete. Further technical specifications: Anchor length: 155mm; Push-through installation: Yes; Thread size (mm): 10mm; ICC approval: Yes; Material: Electrogalvanized steel; Min. drill hole depth for push-through installation: 140mm; Min. embedment depth: 70mm; Fixture thickness: 50mm; Professional / DIY: Professional; Test marks / approvals: VdS approval, ICC - ES approval, Seismic, ETA - European Technical Assessment, Fire protection classification, FM (Factory Mutual); Seismic approval: C1 / C2; Washer (outer diameter x thickness): 25 x 3mm; VDS approval: Yes; Packaging variant: Folding box; Max. fixture thickness: 50mm ETA approval for cracked concrete and seismic loads. Effort-saving installation due to optimized anchor geometry. With cap nut. Fewer fastening points due to high shear load capacity. Time-saving push-through installation.