Heavy-duty anchor FH II M10 15/10 H FISCHER

The fischer high-performance anchor FH II H with cap nut is a sleeve anchor made of electro-galvanized steel. The anchor is installed in a time-saving push-through installation. When tightening the anchor, the cone is pulled into the expansion sleeve, bracing it against the drill hole wall. The black plastic ring prevents the anchor from spinning and absorbs the tightening slip. This pulls the attachment part against the anchoring base. The fischer high-performance anchor FH II H with cap nut is ideally suited for fastening steel structures, machines, and gates in cracked and non-cracked concrete. Further technical properties: · Anchor length: 115mm · Push-through installation: Yes · Thread size (mm): 10mm · ICC approval: Yes · Material: Electro-galvanized steel · Min. drill hole depth for push-through installation: 100mm · Min. embedment depth: 70mm · Effective length: 10mm · Professional / DIY: Professional · Test marks / approvals: FM (Factory Mutual), Fire protection classification, ETA - European Technical Assessment, Seismic, VdS Recognition, ICC - ES Approval · Seismic approval: C1 / C2 · Washer (outer diameter x thickness): 25 x 3mm · VDS approval: Yes · Packaging variant: Folding box · Max. thickness of the attachment part: 10mm ETA approval for cracked concrete and seismic loads. Effort-saving installation due to optimized anchor geometry. With cap nut. Fewer fastening points due to high shear load capacity. Time-saving push-through installation.