High-performance anchor FH II D.10 Fixture thickness max. 25mm FISCHER

The fischer high-performance anchor FH II S with hex head is a sleeve anchor made of electrogalvanized steel. The anchor is installed using the time-saving push-through installation method. When the anchor is tightened, the cone is pulled into the expansion sleeve, bracing it against the drill hole wall. The black plastic ring prevents the anchor from spinning and absorbs the tightening slip. This pulls the attachment part against the anchoring substrate. The fischer high-performance anchor FH II S with hex head is ideally suited for fastening consoles, steel structures, and cable trays in cracked and uncracked concrete. Marketing Claim: The through-anchor for fastenings with demanding design in cracked concrete. Advantages: The international approvals guarantee maximum safety and highest performance. Applications in earthquake zones (seismic C1 and C2) are also covered by these approvals. The low projection of the screw head ensures a discreet fastening. The ideal interaction of the screw shaft and sleeve enables high shear load capacity. This means fewer fastening points are required. The optimized geometry intelligently reduces the setting energy, thus ensuring force-saving installation. The use of hollow drill bits is regulated in the approval. Top Features: The international approvals guarantee maximum safety and highest performance. Also for applications in earthquake zones (seismic C1 and C2). The ideal interaction of the screw shaft and sleeve enables high shear load capacity and fewer fastening points. The optimized geometry intelligently reduces the setting energy, thus ensuring force-saving installation. Further technical specifications: · Anchor length: 85mm · Push-through installation: Yes · Thread size (mm): 6mm · Material: Electrogalvanized steel · Min. drill hole depth for push-through installation: 80mm · Min. drill hole depth for pre-installation: 55mm · Min. embedment depth: 40mm · Usable length: 25mm · Professional / DIY: Professional · Test mark / Approvals: Fire protection classification, ETA - European Technical Assessment · Screw dimension: M6 x 85mm · Washer (outer diameter x thickness): 12 x 2mm · VDS approval: Yes · Packaging variant: Folding box · Max. thickness of attachment part: 25mm ETA approval for cracked concrete. Force-saving installation due to optimized anchor geometry. Fewer fastening points due to high shear load capacity. Time-saving push-through installation.