Highbond Anchor FHB-A M24 x 220/50 Special Anchor Rod FISCHER

The fischer Highbond anchor dynamic FHB-A dyn is made from electrogalvanized steel. The torque-controlled expanding composite anchor is installed with the Highbond special mortar FIS HB. When the hexagon nut is tightened, the cones of the anchor rod are pulled into the mortar capsule, which expands against the drill hole wall. During installation, the FIS HB injection mortar fills the annular gap in the fixture and ensures optimal load distribution. This allows for the absorption of dynamic pulsating and alternating loads. The fischer Highbond anchor dynamic FHB-A dyn is ideally suited for fastening elevator guide rails, industrial robots, or gantry and overhead cranes indoors. Marketing Claim: The ultimate in dynamic anchors. Advantages: The Highbond anchor rod dynamic FHB-A dyn is installed in conjunction with the Highbond special mortar FIS HB. During installation, the FIS HB injection mortar fills the annular gap in the fixture and ensures optimal load distribution. This allows for the absorption of dynamic pulsating and alternating loads. The cone geometry of the FHB-A dyn anchor rod ensures reliable post-expansion under dynamic stress, thus enabling its use in cracked concrete. The FHB-A dyn anchor rod is also available in highly corrosion-resistant steel. This makes it suitable for applications in aggressive atmospheres, e.g., tunnels. The Highbond anchor dynamic system achieves even higher shear loads thanks to the additional sleeve in the FHB-A dyn V anchor rod, thus offering an increased level of safety. The ETA for static and quasi-static loads allows the use of sizes M12 and M16 also for fiber-reinforced concrete as an anchoring substrate. Top Features: Reliable post-expansion under dynamic loads thanks to cone geometry. Absorption of dynamic pulsating and alternating loads thanks to optimal load distribution. Approved for cracked concrete and, according to ETA for static and quasi-static loads, for use in fiber-reinforced concrete in M12 / M16. Further technical properties: · Building material: uncracked concrete, cracked concrete · Drill hole diameter in fixture: 29mm · Drilling depth through fixture: 275mm · DIBT approval: Yes · Thread size (mm): 24mm · Min. drill hole depth for push-through installation: 275mm · Professional / DIY: Professional · Test mark / approvals: DIBT approval · Spanner size: 36mm · Mortar scale divisions: 38 · VDS approval: Yes · Packaging variant: Folding carton · Min. / max. usable length: 14 - 50mm Absorption of dynamic pulsating and alternating loads thanks to optimal load distribution. Reliable post-expansion under dynamic loads thanks to cone geometry. Approved for cracked concrete.