Highbond Anchor FHB-A M12 x 100/50 V Special Anchor Rod FISCHER

The fischer Highbond anchor dynamic FHB-A dyn V is made of electrogalvanised steel. The anchor rod is reinforced at the shank with a sleeve to absorb maximum shear forces. The force-controlled expanding bonded anchor is processed with the special Highbond mortar FIS HB. When the hexagonal nut is tightened, the cones of the anchor rod are pulled into the mortar capsule, which braces against the drill hole wall. During the setting process, the injection mortar FIS HB closes the annular gap in the fixture and ensures optimal load distribution. This allows for the absorption of dynamic pulsating and alternating loads. The fischer Highbond anchor dynamic FHB-A dyn V is ideally suited for fastening elevator guide rails, industrial robots or gantry and overhead travelling cranes indoors. Marketing Claim: The performance class among dynamic anchors – with reinforced sleeve. Advantages: The Highbond anchor rod dynamic FHB-A dyn is set in conjunction with the special Highbond mortar FIS HB. During the setting process, the injection mortar FIS HB closes the annular gap in the fixture and ensures optimal load distribution. This allows for the absorption of dynamic pulsating and alternating loads. The cone geometry of the FHB-A dyn anchor rod ensures secure post-expansion under dynamic stress and thus enables use in cracked concrete. The FHB-A dyn anchor rod is also available in highly corrosion-resistant steel. This makes it suitable for applications in aggressive atmospheres, e.g., tunnels. The Highbond anchor dynamic system achieves even higher shear forces through the additional sleeve on the FHB-A dyn V anchor rod, thus offering an increased level of safety. The ETA for static and quasi-static loads allows the use of sizes M12 and M16 also for the anchorage base steel fiber concrete. Top Features: Absorption of maximum shear forces. Additional sleeve offers maximum safety. Secure post-expansion under dynamic load due to cone geometry. Absorption of dynamic pulsating and alternating loads due to optimal load distribution. Approved for cracked concrete and, according to ETA for static and quasi-static loads in M12 / M16, also for use in the anchorage base steel fiber concrete. Further technical properties: · Building material: uncracked concrete, cracked concrete · Drill hole diameter in fixture: 21mm · Drill depth through fixture: 85mm · DIBT approval: Yes · Thread size (mm): 12mm · Min. drill hole depth for push-through installation: 160mm · Professional / DIY: Professional · Test marks / approvals: DIBT approval · Spanner size: 19mm · Scale divisions mortar: 12 · VDS approval: Yes · Packaging variant: Folding carton · Min. / max. usable length: 8 - 50mm Absorption of maximum shear forces. Additional sleeve offers maximum safety. Absorption of dynamic pulsating and alternating loads due to optimal load distribution. Secure post-expansion under dynamic load due to cone geometry. Approved for cracked concrete.