Heavy-duty anchor FHB-A diameter 16mm embedment depth 125mm SW 24mm 10 FISCHER

The fischer Highbond anchor dynamic FHB-A dyn is made from electro-galvanised steel. The torque-controlled expansion anchor is installed with the Highbond special mortar FIS HB. When the hexagon nut is tightened, the cones of the anchor rod are pulled into the mortar capsule, which braces itself against the drill hole wall. During installation, the FIS HB injection mortar fills the annular gap in the fixture, ensuring optimum load distribution. This allows for the absorption of dynamic pulsating and alternating loads. The fischer Highbond anchor dynamic FHB-A dyn is ideally suited for fastening elevator guide rails, industrial robots, or gantry and overhead cranes indoors. Marketing Claim: The performance class among dynamic anchors. Advantages: The Highbond anchor rod dynamic FHB-A dyn is installed in conjunction with the Highbond special mortar FIS HB. During installation, the FIS HB injection mortar fills the annular gap in the fixture and ensures optimum load distribution. This allows for the absorption of dynamic pulsating and alternating loads. The cone geometry of the FHB-A dyn anchor rod ensures reliable post-expansion under dynamic stress, thus enabling its use in cracked concrete. The FHB-A dyn anchor rod is also available in highly corrosion-resistant steel. This makes it suitable for applications in aggressive atmospheres, e.g., tunnels. The Highbond anchor dynamic system achieves even higher shear forces with the additional sleeve on the FHB-A dyn V anchor rod, thus offering an increased level of safety. The ETA for static and quasi-static loads allows the use of sizes M12 and M16 also for the anchorage base of steel fibre concrete. Top Features: Reliable post-expansion under dynamic load due to cone geometry. Absorption of dynamic pulsating and alternating loads due to optimal load distribution. Approved for cracked concrete and, according to ETA for static and quasi-static loads, in M12 / M16 also for use in the anchorage base of steel fibre concrete. Further technical properties: · Drill hole diameter in the attachment part: 19mm · DIBT approval: Yes · Thread size (mm): 16mm · Min. drill hole depth for through-installation: 235mm · Professional / DIY: Professional · Wrench size: 24mm · Min. / max. usable length: 10 - 105mm