Grundfos Submersible Pump SP3A-15 Rp1_1/4 4

SP 3A-15 Submersible pump for clean water. For vertical or horizontal installation, e.g. in wells. All steel parts made of corrosion-resistant stainless steel 1.4301 (AISI 304). With drinking water approval. The pump is equipped with a 1.1 kW MS402 motor with sand shield, lip seal, water-lubricated journal bearings and pressure-equalizing diaphragm. Robust, efficiency-optimized submersible motor with canned motor design. Suitable for media temperatures up to 40 degrees Celsius. Motor without temperature sensor. A Pt1000 sensor can be installed for temperature monitoring. Motor starting method: Direct-On-Line (DOL). Pumped liquid: Pumped liquid: Water Liquid temperature range: -15 .. 40 Celsius Max. liquid temp. at 0.15 m/s: 40 Celsius Liquid temperature during data acquisition: 20 Celsius Density: 998.2 kg/m3 Technical data: Pump speed on which pump data is based: 2900 rpm Rated flow: 3 m3/h Rated head: 67 m Motor shaft seal: LIPSEAL Approvals: CE, EAC, UKCA, SEPRO, MOROCCO Drinking water approvals: ACS, DM174 ISO acceptance class: ISO9906:2012 3B Motor design: T40 Non-return valve: Yes Shaft end specification: Keyway Materials: Pump: Stainless steel Pump: EN 1.4301 Pump: AISI 304 Impeller material: Stainless steel Impeller: EN 1.4301 Impeller material according to ASTM: AISI 304 Motor: Stainless steel Motor: DIN W.-Nr. 1.4301 Motor: AISI 304 Installation: Maximum ambient pressure: 15 bar Max. operating pressure: 15 bar Maximum operating pressure: 9.7 bar Connection type: Rp Connection size: 1 1/4 inch Motor diameter: 4 inch Minimum bore diameter: 105 mm Electrical data: Motor type: MS402 Motor flange design: Grundfos Motor rated power P2: 1.1 kW Power consumption (P2) of the pump: 1.1 kW Mains frequency: 50 Hz Rated voltage: 3 x 380-400-415 V Rated current: 3.25-3.40-3.65 A Starting current: 480-480-470 % Power factor Cos phi: 0.76-0.72-0.65 Rated speed: 2850-2860-2870 rpm Starting method: Direct-On-Line Enclosure class (IEC 34-5): IP68 Insulation class (IEC 85): B Built-in temperature sensor: No Cable length: 1.7 m Power cable type: FLAT Motor - Product number: 79192005 Motor winding: Enamelled Other: Minimum efficiency index MEI >=: 0.70 Net weight: 15.1 kg Gross weight: 16.5 kg Shipping volume: 0.016 m3 Danish VVS No.: 388313150 Swedish RSK No.: 5852980 Finnish LVI No.: 4762653 Country of origin: DK Customs tariff No.: 84137029 Approvals: WEEE