Figure Shears DSET16 3-piece right/left/straight-cutting 2-component handles 1.231kg

Care instructions: Generally remove dirt. At regular intervals - depending on the degree of soiling - wipe the cutting edge with a slightly oily cloth (remove material dust). Regularly oil the screw connection on the inside of the blade. Lightly abrade rusty or scratched cutting edges with an oil stone. If the shears have too much play, then readjust the screw. (The shears must still open and close easily.) Hazard warnings: Hand metal shears may only be used for cutting thin sheets of soft metals or steel. They are not suitable for cutting round and angular metal shapes such as wire. Cutting tools may only be used by hand without additional aids. Wear safety glasses and gloves when working. Cut parts can injure workers and bystanders. Improper use can cause personal injury or property damage. For work on electrical equipment, the connection to the power source must be interrupted. Otherwise, an electric shock could occur. Always guide the cutting direction of shears and knives away from the body. Always place cutting tools with closed blades in a clearly visible place. The handle should point towards you! Store cutting tools separately! This protects the cutting edges and your fingers! Cutting tools must be sharpened regularly! With dull cutting tools, the risk of injury is greater and more force must be applied for the same cutting performance. Cutting edge with micro-serration for non-slip work · D16/D16L: For short straight and figure cuts · D16S: For short straight and figure cuts with a wide radius to the right and left. Further technical features: · Pieces/packaging unit: 1 Scope of delivery: 1 x D16, 1 x D16L and 1 x D16S in a roll-up bag