Fixed point heavy FFP-HD42 max. pipe diameter 355.6mm overall height 350-2000mm FISCHER

The heavy fixed points in a compact and variable design prevent unwanted displacements between pipes and structures in hot or cold lines and are suitable for directing thermally induced pipe expansion in the desired direction. The compact fixed points FFS-H reliably and directly transfer the incoming forces into the structure and are height-adjustable. The variable fixed points FFP-H allow the suspension height to be adjusted to suit the pipe position and are braced on one or both sides with threaded rods. The FFP-HD22 and FFP-HD42 can accommodate the FFRC refrigeration fixed point in addition to the FFSC fixed point clamp. The galvanized version is suitable for installations in buildings. Marketing Claim: The fixed point solution for heavy loads Advantages: The supports and one-sided bracing of the variable fixed point solution allow adaptation to the distance between the pipeline and the substrate. The fixed points consist of components with the same thread sizes and dowel holes, thus ensuring easy assembly with the same tools. The height adjustment on the base plate allows fine adjustment to adapt to installed pipelines, thus ensuring the safe function of the fixed point. The axially and laterally adjustable bracing angles allow the subfloor connection to be adapted to local conditions and simplify assembly. The fixed point is suitable for accommodating the FFSC fixed point clamp and FFRC refrigeration fixed point clamp for even greater flexibility. Top Features: Variable distance up to 500 mm. Accommodates the FFRC refrigeration fixed point clamp. Axially and laterally adjustable bracing. Changing or unknown force directions possible. Further technical properties: · Bracing angle: 35 - 45 degrees · Min. installation height: 350mm · Pro / DIY: Pro · Max. installation height: 2000mm · Max. recommended axial load: 30kN · Max. recommended pipe ø: 355.6