Fixed point support FFP-MD4-V2 max. pipe diameter 355.6mm installation height 330-1500mm fvz

The medium-duty anchors, with their variable design, prevent unwanted displacement between pipes and structures in hot or cold lines and are suitable for directing thermally induced pipe expansion in the desired direction. The variable anchors FFP-M allow the suspension height to be adjusted to suit the pipe position and are braced with threaded rods on one or both sides. In addition to the FFSC anchor clamp, the FFP-M and FFP-M2 can also accommodate the FFRC cold anchor. The galvanized version is suitable for installations in buildings. Marketing Claim: The anchor solution for medium loads Advantages: The supports and one-sided bracing of the variable anchor solution allow adaptation to the distance between the pipeline and the substrate. The anchors consist of components with identical thread sizes and dowel holes, thus ensuring easy assembly with the same tools. The height adjustment on the base plate allows for fine adjustment to adapt to installed pipelines, thereby ensuring the safe function of the anchor. The axially and laterally adjustable bracing angles allow the adaptation of the substrate connection to on-site conditions and facilitate assembly. Top Features: Variable distance up to 500 mm. Easy assembly with the same tools. Axially and laterally adjustable bracing. Changing or unknown force directions possible. Recommended pipe dimension = 355.6 mm. Further technical properties: · Bracing angle: 35 - 45 degrees · Min. construction height: 330mm · Professional / DIY: Professional · Max. construction height: 1500mm · Max. recommended axial load: 18kN · Max. recommended pipe ø: 355.6