Fixed point support medium FFP-MD2-V2 max. pipe diameter 355.6mm installation height 330-1500mm fvz

Medium-duty anchors, with their variable design, prevent undesirable shifts between pipes and structures in hot or cold-running lines and are suitable for directing thermally induced pipe expansion in the desired direction. The variable anchors FFP-M allow for the adjustment of the suspension height to match the pipe position and are supported on one or both sides with threaded rods. In addition to the FFSC anchor clamp, the FFP-M and FFP-M2 can also accommodate the FFRC cold anchor. The galvanized version is suitable for indoor installations. Marketing Claim: The anchor solution for medium-duty loads Benefits: The supports and one-sided bracing of the variable anchor solution allow for adaptation to the distance between the pipeline and the subsurface. The anchors consist of components with the same thread sizes and dowel holes, ensuring easy assembly with the same tools. The height adjustment on the base plate allows for fine adjustment to adapt to mounted pipelines, thereby ensuring the reliable function of the anchor. The axially and laterally adjustable bracing angles allow the subsurface connection to be adapted to on-site conditions and facilitate assembly. Top Features: Variable distance up to 500 mm. Easy assembly with the same tools. Axially and laterally adjustable bracing. Changing or unknown force directions possible. Recommended pipe dimension = 355.6 mm. Further technical properties: · Bracing angle: 35 - 45 degrees · Min. installation height: 330mm · Professional / DIY: Professional · Max. installation height: 1500mm · Max. recommended axial load: 12kN · Max. recommended pipe ø: 355.6