Fixed point FFP-MD2-V1 max. pipe diameter 193.7mm installation height 250-1500mm fvz

The medium-duty anchor points in variable design prevent unwanted displacement between pipes and structures in hot or cold pipelines and are suitable for aligning thermally induced pipe expansion in the desired direction. The variable anchor points FFP-M allow for adjustment of the suspension height to match the pipe position and are braced with threaded rods on one or both sides. In addition to the FFSC anchor clamp, the FFP-M and FFP-M2 can also accommodate the FFRC cold anchor point. The galvanized version is suitable for installations in buildings. Marketing Claim: The anchor point solution for medium-duty loads. Advantages: The supports and one-sided bracing of the variable anchor point solution allow for adaptation to the distance of the pipeline from the substrate. The anchor points consist of components with the same thread sizes and dowel holes, thus ensuring easy installation with the same tools. The height adjustment on the base plate allows for fine adjustment to adapt to installed pipelines, thus guaranteeing the safe function of the anchor point. The axially and laterally adjustable bracing angles enable adaptation of the substrate connection to on-site conditions and facilitate installation. Top Features: Variable distance up to 500 mm. Easy installation with the same tools. Axially and laterally adjustable bracing. Recommended pipe dimension = 193.7 mm. Further technical specifications: · Bracing angle: 35 - 45 degrees · Min. overall height: 250mm · Professional / DIY: Professional · Max. overall height: 1500mm · Max. recommended axial load: 12kN · Max. recommended pipe-ø: 193.7