ETA SH 30P Touch Wood Gasification Boiler 30kW Pellet Burner Connections on Both Sides

ETA SH 30P Wood gasification boiler 10 - 30 kW incl. pellet flange for 1/2m logs,
Patented, insulated glow zone combustion
chamber, modulating combustion control,
lambda probe for automatic adjustment of
primary and secondary air, speed-controlled
induced draught fan, flue gas extraction
above the filling door, turbulators in the
heat exchanger with shaking device for
cleaning, complete ash removal from the front.
Tested by BLT Wieselburg and TÜV Sued.

Microprocessor control:
Operation with 7-inch touchscreen with
intuitive user guidance,
2 mixing heating circuits with weekly program
(sensor 19026-01 required for 2nd mixing
circuit), expansion with room sensors possible.
Storage tank charging or fresh water module,
circulation pump, buffer management, solar
system (sensor set 19027-01 required),
input for external heat demand, potential-free
output (changeover contact) for fault message,
LAN interface for internet connection.
Remote control of the regulation and e-mail
notification via the free internet platform
www.meinETA.at

3 buffer sensors, 1 outdoor, 1 domestic
hot water storage tank and 1 flow sensor
included in delivery,
Boiler pre-wired for plug-in connection.

Technical data:
Rated power range (W20): 15.0-30.0kW
Boiler temperature adjustable: 70-85 C
Boiler efficiency: Part/Nominal 92.7/89.3%
Filling volume: 150 lt 1/2m logs
Boiler dimensions: WxDxH 650x1100x1504mm
Total weight: 583kg
Flue gas connection diameter: 150mm
Minimum connection height chimney: 1720mm
Electrical power consumption: 86W
Energy efficiency index: 119
Energy efficiency class: A+
Power connection: 1x230 V / 50 Hz / 3 A