ETA eSH - Twin Set 20-16

ETA eSH - Twin Set 20/16 combustion control, lambda probe for
automatic primary and secondary air adjustment,
speed-controlled induced draft fan with EC motor,
large loading door with pyrolysis gas extraction,
automatic ignition using glow igniter, integrated
return flow temperature increase with mixer and
high-efficiency pump and optionally
integrated electrostatic
particle separator with automatic
cleaning, turbulators in the
heat exchanger with shaking device
for cleaning, full ash removal
from the front. Integrated sensor for
measuring the generated heat quantity
(not calibrated).

Automatic switching between
log wood and pellet operation without
conversion, modulating combustion control,
water-cooled pellet retort separate from the wood gasification boiler,
with moving rotary grate and
continuous ash removal, pellet
conveying up to 20m distance from
storage to the intermediate tank at the boiler
with suction turbine, with metering screw
relieved rotary valve for
backfire protection, hot air ignition,
automatic heat exchanger cleaning
by means of turbulators, full ash removal
of the pellet burner and compression
into a removable ash container,
long ash box emptying intervals.

Microprocessor control:
Operation with 7-inch touchscreen with
intuitive user guidance,
2 mixing heating circuits with weekly program
(for 2nd mixing circuit, sensor 19026-01
required), expansion with
room sensors possible.
Storage tank charging or fresh water module,
circulation pump, buffer management,
solar system (sensor set 19027-01 required),
input for external heat demand,
potential-free output (changeover contact) for
fault message, LAN interface for
internet connection.
Remote control of the regulation and email
notification via the free
internet platform www.meinETA.at

3 buffer sensors, 1 outdoor sensor,
1 hot water tank sensor and 1 flow
sensor included in the scope of delivery,
boiler pre-wired for plug-in connection.

Technical data wood gasifier:
Rated output (W20): 20.0kW
Boiler temperature adjustable: 70-85 C
Boiler efficiency: Partial/Rated 94.2%
Filling volume: 100 lt 1/2m logs
Boiler dimensions: WxDxH 586x1100x1250mm
Total weight: 460kg
Exhaust pipe diameter: 130mm
Minimum chimney connection height: 1200mm
Electrical power consumption: 58W
Power connection: 1x230 V / 50 Hz / 3 A

Technical data pellet burner:
Rated power range: 4.8-16.0kW
Boiler efficiency: Partial/Rated 92.7/94.5%
Installation dimensions: WxDxH 740x546x1494mm
Weight: 150kg
Power connection: 1x230V / 50Hz / 13A