FHB-A dyn 16x125/80 (s) FISCHER dynamic anchor

The fischer Highbond anchor dynamic FHB-A dyn is made of electro-galvanized steel. The force-controlled expansion adhesive anchor is installed with fischer Highbond special mortar FIS HB. When the hex nut is tightened, the cones of the anchor rod are pulled into the mortar capsule, which braces itself against the drill hole wall. During installation, the injection mortar FIS HB closes the annular gap in the fixture and guarantees optimal load distribution. This allows for the absorption of dynamic pulsating and alternating loads. The fischer Highbond anchor dynamic FHB-A dyn is ideally suited for fastening elevator guide rails, industrial robots, or gantry and ceiling-mounted cranes indoors. Marketing Claim: The performance class among dynamic anchors. Advantages: The Highbond anchor rod dynamic FHB-A dyn is set in conjunction with the Highbond special mortar FIS HB. During installation, the injection mortar FIS HB closes the annular gap in the fixture and ensures optimal load distribution. This allows for the absorption of dynamic pulsating and alternating loads. The cone geometry of the FHB-A dyn anchor rod ensures reliable post-expansion under dynamic stress, thus enabling its use in cracked concrete. The FHB-A dyn anchor rod is also available in highly corrosion-resistant steel, making it suitable for applications in aggressive atmospheres, e.g., tunnels. The Highbond anchor dynamic system achieves even higher shear forces with the additional sleeve on the FHB-A dyn V anchor rod, thus offering an increased level of safety. The ETA for static and quasi-static loads allows the use of sizes M12 and M16 also for fiber-reinforced concrete as the anchoring base. Top Features: Reliable post-expansion under dynamic loads due to cone geometry. Absorption of dynamic pulsating and alternating loads due to optimal load distribution. Approved for cracked concrete and, according to ETA for static and quasi-static loads, in M12 / M16 also for use in fiber-reinforced concrete as the anchoring base. Further technical properties: · Building material: cracked concrete · Drill hole diam. in fixture: 19mm · DIBt approval: Yes · Thread size (mm): 16mm · Min. drill hole depth for push-through installation: 210mm · Wrench size: 24mm · Packaging variant: Folding box · Min. / max. usable length: 10 - 80mm