Dynamic Anchor FHB-A dyn 16x125/50 HCR (4) Special Anchor Rod FISCHER

The fischer Highbond anchor dynamic FHB-A dyn is made of highly corrosion-resistant steel. This force-controlled expanding composite anchor is installed with the Highbond special mortar FIS HB. When the hexagon nut is tightened, the cones of the anchor rod are pulled into the mortar capsule, which braces against the drill hole wall. During installation, the injection mortar FIS HB closes the annular gap in the fixture and ensures optimal load distribution. This allows for the absorption of dynamic pulsating and alternating loads. The fischer Highbond anchor dynamic FHB-A dyn is ideally suited for fastening, for example, sign gantries or jet fans in tunnels. Marketing Claim: The top-performing dynamic anchor – even in highly corrosive atmospheres. Advantages: The Highbond anchor rod dynamic FHB-A dyn is installed in conjunction with the Highbond special mortar FIS HB. During installation, the injection mortar FIS HB closes the annular gap in the fixture and ensures optimal load distribution. This allows for the absorption of dynamic pulsating and alternating loads. The cone geometry of the FHB-A dyn anchor rod ensures reliable post-expansion under dynamic stress, thus enabling use in cracked concrete. The FHB-A dyn anchor rod is also available in highly corrosion-resistant steel. This makes it suitable for applications in aggressive atmospheres, e.g., tunnels. The Highbond anchor dynamic system achieves even higher shear loads with the additional sleeve of the FHB-A dyn V anchor rod, thus offering an increased level of safety. The ETA for static and quasi-static loads allows for the use of sizes M12 and M16 also for anchor base steel fiber concrete. Top Features: Reliable post-expansion under dynamic load due to cone geometry. Absorption of dynamic pulsating and alternating loads due to optimal load distribution. Approved for cracked concrete and, according to ETA for static and quasi-static loads in M12 / M16, also for use in steel fiber concrete as an anchor base. Made of highly corrosion-resistant steel for highly corrosive atmospheres. Further technical properties: · Building material: cracked concrete · Drill hole diameter in fixture: 19mm · DIBT approval: Yes · Thread size (mm): 16mm · Min. drill hole depth for push-through installation: 180mm · Professional / DIY: Professional · Test mark / approvals: DIBT approval · Wrench size: 24mm · Packaging variant: Folding box · Min. / max. usable length: 10 - 50mm