Dynamic anchor FHB-A dyn 12x100/25 HCR (4) Special anchor rod FISCHER

The fischer Highbond anchor dynamic FHB-A dyn is made of highly corrosion-resistant steel. The force-controlled expansion anchor is installed with fischer Highbond special mortar FIS HB. When the hexagon nut is tightened, the cones of the anchor rod are pulled into the mortar capsule, which braces itself against the drill hole wall. During installation, the injection mortar FIS HB fills the annular gap in the fixture and ensures optimal load distribution. This allows dynamic pulsating and alternating loads to be absorbed. The fischer Highbond anchor dynamic FHB-A dyn is ideally suited for fastening, for example, gantry signs or jet fans in tunnels. Marketing Claim: The performance class among dynamic anchors - even in highly corrosive atmospheres. Advantages: The Highbond anchor rod dynamic FHB-A dyn is installed in conjunction with the Highbond special mortar FIS HB. During installation, the injection mortar FIS HB fills the annular gap in the fixture and ensures optimal load distribution. This allows the absorption of dynamic pulsating and alternating loads. The cone geometry of the anchor rod FHB-A dyn ensures reliable post-expansion under dynamic stress and thus enables use in cracked concrete. The FHB-A dyn anchor rod is also available in highly corrosion-resistant steel, making it suitable for applications in aggressive atmospheres, e.g. tunnels. The Highbond anchor dynamic system achieves even higher shear forces with the additional sleeve on the anchor rod FHB-A dyn V and thus offers an increased level of safety. The ETA for static and quasi-static loads allows the use of sizes M12 and M16 also for the anchorage base fiber concrete. Top Features: Reliable post-expansion under dynamic load due to cone geometry. Absorption of dynamic pulsating and alternating loads due to optimal load distribution. Approved for cracked concrete and, according to ETA for static and quasi-static loads, in M12 / M16 also for use in the anchorage base fiber concrete. Made of highly corrosion-resistant steel for highly corrosive atmospheres. Further technical properties: · Building material: cracked concrete · Drill hole diameter in the attachment part: 15mm · DIBt approval: Yes · Thread size (mm): 12mm · Min. drill hole depth for push-through installation: 130mm · Professional / DIY: Professional · Test mark / approvals: DIBt approval · Wrench size: 19mm · Min. / max. usable length: 8 - 25mm