Dynamic Anchor FDA D18 x L125 Usable Length 16-50mm Push-through Installation FISCHER

The fischer Dynamic Anchor FDA-A with pre-assembled anchor rod for quick installation. The steel anchor is suitable for push-through installation, and small edge distances also allow for fastening at the plate edge. Tested safety through general building inspectorate approval for an infinite number of load cycles. The Dynamic Anchor can be fully bonded to the drill hole wall with FIS HB injection mortar. Thanks to its medium load level, it is suitable for a variety of applications such as car lifts, conveyor belts, industrial robots, collaborative robots and systems, and guide rails for elevators. Marketing claim: Pre-assembled anchor rod for quick and easy push-through installation. Advantages: Easy push-through installation ensures high cost-effectiveness, especially for series assembly. Compact range in sizes M12 and M16 in electrogalvanized steel. Absorbs dynamic pulsating and alternating loads due to optimal load distribution. Small edge distances allow for fastenings at the plate edge. Medium load level for a variety of applications. Pre-assembled anchor rod for quick installation. Tested safety according to ETA assessment. Approved for cracked concrete. Further technical features: · Building material: uncracked concrete, cracked concrete · Drill hole diameter in fixture: 19mm · Drill depth through fixture: 180mm · Thread size (mm): 16mm · Length: 205mm · Material: Electrogalvanized steel 8.8 · Min. drill hole depth for push-through installation: 180mm · Professional / DIY: Professional · Test marks / approvals: DIBT approval · VDS approval: Yes · Anchoring depth: 125mm · Min. / max. usable length: 16 - 50mm