Dynamic Anchor FDA D14 x L100 Usable length 12-50mm Push-through installation FISCHER

The fischer Dynamic Anchor FDA-A with pre-assembled anchor rod for quick installation. The steel anchor is suitable for through-fastening installation, and small edge distances also allow fastening at the edge of the slab. Tested safety through general building authority approval for an infinite number of load cycles. The dynamic anchor can be bonded fully to the drill hole wall with FIS HB injection mortar. Thanks to its medium load level, it is suitable for a variety of applications such as car lifts, conveyor belts, industrial robots, collaborative robots and systems, as well as guide rails for elevators. Marketing claim: Pre-assembled anchor rod for quick and easy through-fastening installation. Advantages: Simple through-fastening installation ensures high cost-effectiveness, especially for series production. Lean product range in sizes M12 and M16 in electro-galvanized steel. Absorbs dynamic pulsating and alternating loads through optimal load distribution. Small edge distances allow fastenings at the edge of the slab. Medium load level for a variety of applications. Pre-assembled anchor rod for quick installation. Tested safety according to ETA assessment. Approved for cracked concrete. Further technical properties: · Building material: uncracked concrete, cracked concrete · Drill hole diameter in component: 15mm · Drill depth through component: 155mm · Thread size (mm): 12mm · Length: 175mm · Material: Electro-galvanized steel 8.8 · Min. drill hole depth for through-fastening installation: 155mm · Professional / DIY: Professional · Test mark / approvals: DIBt approval · VDS approval: Yes · Anchoring depth: 100mm · Min. / max. usable length: 12 - 50mm