Dynamic Anchor FDA D14 x L100 Usable Length 12-25mm Push-Through Installation FISCHER

The fischer Dynamic Anchor FDA-A with pre-assembled anchor rod for quick installation. The steel anchor is suitable for push-through installation, and small edge distances also allow fastening at the edge of the plate. Tested safety through general building approval for an infinite number of load cycles. The dynamic anchor can be fully bonded to the borehole wall with FIS HB injection mortar. Thanks to its medium load level, it is suitable for a variety of applications such as car lifts, conveyor belts, industrial robots, collaborative robots and systems, and guide rails for elevators. Marketing claim: Pre-assembled anchor rod for quick and easy push-through installation. Advantages: Simple push-through installation ensures high cost-effectiveness, especially for series installation. Tight range in sizes M12 and M16 in electro-galvanized steel. Absorbs dynamic pulsating and alternating loads through optimal load distribution. Small edge distances allow fastenings at the edge of the plate. Medium load level for a variety of applications. Pre-assembled anchor rod for quick installation. Tested safety according to ETA assessment. Approved for cracked concrete. Further technical properties: · Building material: uncracked concrete, cracked concrete · Drill hole diameter in the attachment: 15mm · Drilling depth through attachment: 130mm · Thread size (mm): 12mm · Length: 155mm · Material: Electro-galvanized steel 8.8 · Min. drill hole depth for push-through installation: 130mm · Professional / DIY: Professional · Test marks / approvals: DIBT approval · VDS approval: Yes · Anchoring depth: 100mm · Min. / max. usable length: 12 - 25mm