Torque Wrench 5121KV Calibratable 20-120 Nm HAZET

Calibratable Long service life / high accuracy Possible to: Disassemble Repair (if necessary) Assemble Adjust Calibrate Note: Adjustment and possible repairs with disassembly/assembly of the KV torque wrench only at the HAZET Service Center Suitable for test equipment monitoring Sustainable and environmentally friendly Safe: Haptic (short-stroke release) Acoustic (flexing element) Left/right release by reversible square drive; this allows tightening with the set torque both clockwise and counter-clockwise within the specified accuracy Low weight for good handling and fatigue-free work Product design features Slim design in strict compliance with the required insulation factors (material thickness / overlaps) Smooth transitions at switching and moving parts with ergonomic handle design and clear calibration groove Uniform appearance even when using other components (e.g. red insulated socket wrench inserts) Appealing color design of the housing and head with signal colors red / yellow Handle color in black for color differentiation and to prevent rapid visual soiling Avoidance of protruding, obstructive parts (e.g. changeover lever) CAUTION: Repairs may only be carried out by the HAZET Service Center, as a subsequent 10,000 V routine test according to IEC 60900 must be performed EN ISO 6789-2:2017 · DIN 3120 · ISO 1174-1 · IEC 60900:2018 Made in Germany Drive: 1/2 inch (12.5 mm) solid square Dimensions / Length: 420 mm VDE protective insulation up to 1000V Torque range min-max: 20–120 Nm Accuracy: 4 % Scale division (Nm): 1 Nm Actuation force min.-max. kg: 6.0–37.4 kg Number of teeth: 32 (actuation angle 11.25°) No more turning back: in HAZET torque wrenches of the 5000 and 6000 series, long-term endurance tests have shown that turning back to the smallest scale value is not necessary, release accuracy from the set scale value: Article no. 8000 753 531 ± 6 % Article no. 8000 753 532 ± 4 % DIN EN ISO 6789-2:2017, square drive according to DIN 3120, ISO 1174-1 Further technical features: · subject to testing: yes · number of teeth: 32 teeth · tightening torque max Nm: 120Nm · tightening torque min Nm: 20Nm · actuation force min. kg: 6kg · actuation angle: 11.25° · accuracy: 4% · standard: DIN EN ISO 6789-2:2017, DIN 3120, ISO 1174-1, IEC 60900:2018 · protective insulation: VDE protective insulation up to 1000V · actuation force max. kg: 37.4kg Supplied with calibration certificate in rotating packaging